Spray Application
- Manual Spray
- Automatic Spray
- Reciprocating Spray
- Linear auto spray
- CNC auto-spray
Manual Spraying
Manual UV Coating Spray – Gloss
Spray Application – Atomisation of Paint
- Paint Application is mostly done by spraying.
- To form a spray, paint is atomised.
- It is the process in which liquid is converted into very small drops.
- It means separating paint into fine particles
There are various types of spray guns in Use, They have different technologies used for Atomisation of Paint for spray painting operation in Industry as follows:
- Air assisted spray
- HVLP ( High Volume Low Pressure )
- Airless spray
- Electrostatic Spray
Spray Application – Spray Painting Guns
- Gravity Feed Spray Gun (Good for Touch-ups / small jobs)
- Siphon Feed Spray Gun (Good for Touch-ups / small jobs)
- Pressure Feed Spray Gun (Good for high production lines)
Automatic Spray Gun (Used on Automatic spray machine)
Spray Application
- Manual Spray
- Automatic Spray
- Reciprocating Spray
- Liner auto spray
- CNC auto-spray
- Rotary Spray
Reciprocating Sprayer
- Reciprocating Automatic Spray Machine is suitable for AC(Melamine), NC, ( Nitrocellulose), PU (Polyurethane), UV( Ultra-Violet Coating) and Water based Coatings.
- Doors, Panel Furniture, Cabinet door, Carving panels such parts can be painted by reciprocating auto spray with edges from one side. For another side panel need to feed again.
- 4 or 8 Automatic spray gun can be used as per requirement. Conventional and Airless air assisted gun can be used or in combination can be used.
- Over spryaed paint is recovered and can be used again by adjusting viscosity.
Fixed Gun Auto Spray Machine
- Fixed Gun Auto Spray Machine can be used for door frame, moldings, photo frame, aluminum channels,
CPVC door frames etc. - This Machine is suitable for AC(Melamine), NC, ( Nitrocellulose), PU ( Polyurethane), UV( Ultra-Violet Coating) and Water based Coatings.
- 4 or 8 Automatic spray gun can be used as per requirement. Conventional and Airless air assisted gun can be used or in combination can be used. Over sprayed paint is recovered and can be used again by adjusting viscosity
CNC Auto Spray
- This Machine is suitable for AC(Melamine), NC, (Nitrocellulose), PU ( Polyurethane), UV( Ultra-Violet Coating) and Water based Coatings.
- Cab be used for painting – furniture, doors, kitchen panels, decorative board and glass.
- Both side with edges can be painted by special designed arrangement.
- Only one side also can be painted.
- 2 Automatic spray gun can be used as per requirement. Conventional and Airless air assisted gun can be used or in combination can be used.
Watch the videos here:
Visit our YouTube channel and please subscribe to watch more such videos.
Please Feel Free to Call Us
Call us on our contact number or you can mail us.